From craft to robot an innovation in industrial method

Kinova

The evaluation of manufacturing is very complex, in the medical and industrial fields. The application of several theories on production capacity and the processes involved will be put into practice in this project in order to validate the hypotheses and assertions in previous studies. Automation in the manufacturing field is ...

Collaborative robot tasked with sanding gypsum walls

RCM

In the context of prefabricated house with gypsum walls, the building step of sanding the left-over plaster used for covering screw holes and joints between the gypsum sheets (on the walls, the ceiling and the corners), is a laborious task. The objective of the project is to detect the areas ...

Explainable Motion of Mobile Manipulators from Null Space

Nuvoola

Evaluation of the application of cable robots to monitoring processing stations.

Hydro Québec

The objective of the project is to evaluate the feasibility of applying the cable robot concept to monitoring Hydro-Québec's processing stations. The research will be conducted at two or three electrical processing stations that require automated monitoring. It will be necessary to determine the workspace that can be reached ...

Visual distinction of plants by machine learning

Vallons maraîchers

Manual weeding of root vegetables is a crucial task for frugal crop yields. However, it is an expensive, lengthy and difficult task for farmers. Desherbex aims at building a robotic farm equipment that can replace manual weeding. It implies that the tool must 1) distinguish weeds from root vegetables and ...

Design of a laparoscopic intervention simulation platform actuated by magnetho-rheological clutches

Exonetik

The research is developing a haptic simulation device actuated by magneto-rheological (MR) clutches to facilitate and accelerate the training of future surgeons by simulating laparoscopic procedures. This device is composed of a robotic arm with 3 degrees of freedom developed by Exonetik and coupled to a robotic trocar with 2 ...

Explainable Motion of Mobile Manipulators from Null Space

À la recherche d'un partenaire

The manufacturing industry is in urgent need of safe and reliable robotic systems to redirect the human workforce towards more creative and conceptual tasks. Based on a safe and reliable mobile platform, a control architecture will be implemented from literature and then extended to help the worker understand the robot ...

Development of a collaborative robotic cell for visual 3D inspection

Exo-S

Development of a collaborative robotic arm powered by magnetorheological clutches

Exonetik

Design and fabrication of a collaborative robot actuated by magnetorheological actuators

Exonetik

The research project involves designing, manufacturing and controlling a collaborative robotic arm using an innovative technology, magnetorheological (MR) clutch. This project idea comes from the low performance of collaborative robots on the market and the great potential of this industry. Performance are limited by the strength and speed limits to ...

Development of unmanned surface vehicle

ABTech

Unmanned Surface Vehicle commonly called USV, are unable to navigate in uncontrolled riverine environnement. They must therefore be supervised at all times in order to avoid obstacles such as shoals, shore and other obstacles on the surface of the water. This is particularly problematic when the objective is to carry ...

Safe telepresence for robots for the manufacturing industry

Cobii

Robot that Cleans Clothes Dryer Exhaust Duct

Oxebo

Inspecting and cleaning of the dryer exhaust pipe is a complicated task due to their small diameter, their tight and multiple elbows, their length and the vertical positioning of some joints. The use of brushes is inefficient for cleaning the pipe, hence the interest in using a mobile robot that ...

Use of collaborative robotics to do metrology

Robotiq

One of the first applications where collaborative robots were successful was machining tending. This task, which consists of loading and unloading a machine tool, is still one of the most common tasks for this type of robot. Their use allows them to replace machinists in a non-value added part of ...

Analysis, synthesis, design and prototyping of a redundant parallel robot with (4 + 1) degrees of freedom for collaboration

Robotiq

Develop control laws for a concept of motorized collaborative lift

Arjo

The objective of this project is to develop control laws for a concept of motorized collaborative lift. The goal is to assist nursing assistants in transferring injured or disabled patients. With the average weight of the population increasing, the risk of injury for nursing staff becomes more and more important ...

Soft Gripper based on Magneto rheological clutches

Exonetik

In many industries such as aerospace or construction, workers may have to lift or handle heavy parts or tools in non-ergonomic positions. The use of a supernumerary limb attached to the worker’s body may drastically improve efficiency and safety. This internship project focuses on the design of an end ...

Automatic visual inspection of aeronautic parts

Pratt & Whitney Canada

See french description

Voice assistant for industrial environments

Agilean

Agilean offers an operations management and optimisation SaaS web app (ALIX - Smart Assistant) as well as digital transformation and operational efficiency consulting services and training. ALIX - Smart Assistant monitors and optimizes resources, equipment (IIoT) and stock (raw materials, Work In Process (WIP) and finished goods) in real time as well ...

High admittance mecanism for insertion tasks

Robotiq

Insertion tasks in the robotic industry are more common today, especially in collaborative robots. These insertions are often slow and require the movement of the entire robot to achieve the insertion and the movement of a gripper over small distances. This system will accelerate the insertion tasks and possibly be ...

Development of a safe and performant collaborative robotic manipulator based on magnetorheological actuators

Exonetik

Collaborative, easy-to-use robotic manipulators are used in the industry to reduce risks or repetitive actions for operators. However, before collaborative robots can perform tasks close to humans, their design must be intrinsically safe and performant to operate without the need to slow their movements and limit their strength. Recent discoveries ...

Omnidirectional AGV (Automated Guided Vehicle) robot control on an automated production line

Inogec

AGVs are becoming more prevalent in industry. These are versatile platforms for moving equipment between storage spaces and work spaces. The omnidirectional models are even more versatile because their great agility allows them to move easily in the cramped spaces typical of industrial environments. Intelligent control of their movements is ...

Reconnaissance automatique d’outils pour le domaine manufacturier

SECM-GT International

Dans un contexte de pénurie de main d’œuvre généralisée dans l’industrie manufacturière, les entreprises cherchent de plus en plus à intégrer l’intelligence artificielle de façon collaborative avec leurs employés actuels dans le but d’augmenter leur capacité concurrentielle. Par exemple, la vision par ordinateur peut être employée ...

Optimisation dynamique de séquences d’opérations d’usinage

SECM-GT International

Dans un contexte de pénurie de main d’œuvre généralisée dans l’industrie manufacturière, les entreprises cherchent de plus en plus à intégrer l’intelligence artificielle de façon collaborative avec leurs employés actuels dans le but d’augmenter leur capacité concurrentielle. La robotique industrielle fait également de plus en plus ...

Position control of a wearable robotic arm

Exonetik

Wearable robotics arms, a robotic arm that is directly installed on a person, are a potential solution to a modern problem, the lack of workforce. Wearable robots could be used to work along with users to help them in a multitudes of industrials tasks. However, position control of wearable robot ...

The study of management methods to facilitate the integration of collaborative robotics in a manufacturing context

René Matériaux Composites

Appart from technical challenges, various human and managerial challenges may result from collaborative robotics implementation. This project aims to identify how employees can be affected by this technology and what are the required practices for proper change management in this context. 

Development of a haptic operation simulator device powered by magnetorheological clutches

Exonetik

The goal of the project is to design a device that will be able to simulate medical operations in order to offer a simulator to doctors in training. The device is a miniature robotic arm that is able to reproduce the forces experienced by a doctor during an operation. The ...

Design of collaborative robots for assembly tasks in aerospace manufacturing processes

Bombardier

This research aims at developing novel robotic systems and approaches tailored to the manufacturing processes used in the aerospace industry.

Image heightening for automatic identification of industrial parts

Robotiq

The success of classical machine vision algorithms varies greatly depending on multiple factors and often requires the input of a computer vision expert and an implementation in an environment where lighting is perfectly controlled to avoid unwanted reflections and specular highlights that could degrade performance of tasks such as object ...

Wearable Collaborative Robotic Tool

Exonetik

The main goal of the project Wearable Collaborative Robotic Tool (WCRT) is to design and control a wearable robotic arm. A supernumerary robotic arm can increase physical strength, do independent tasks near the human and help him with tasks requiring complex manipulations. This solution may be used in the aerospace ...

Autonomous grasping with pre-taught grasps

Robotiq

The objective of this research project is to develop a method for grasping objects in a heap with a serial six-degree-of-freedom robot, the wrist camera and one of the gripper hands produced by Robotiq.  

6D pose estimation for random bin picking

GE Aviation Bromont

The problem to solve is in the category of "random bin picking" of metallic pieces. Object segmentation and pose estimation become difficult as a result of the reflective metallic nature, exasperated by variable light conditions. Moreover, CAD models may not be available for certain parts. Readily available commercial solutions are ...

Haptic Interface for Handshake Emulation

Robotiq

The goal of this project is to develop such an interface to simulate a handshake. A robotic arm and hand make this interface.

Development of a robotic manipulator based on magnetorheological fluid actuators

Exonetik

Collaborative, easy-to-use robotic manipulators are used in the industry to reduce risks or repetitive actions for operators. However, before collaborative robots can perform tasks close to humans, their design must be intrinsically safe and performant to operate without the need to slow their movements and limit their strength. Recent discoveries ...

Design and manufacturing of a wearable and collaborative supplementary robotic arm based on magnetorheological clutches.

Exonetik

Supernumerary robotic limbs (e.g. a second pair of arms) are wearable collaborative robots that enhance human performances and could reduce employee’s fatigue. One of the most challenging feat with collaborative robots is their interaction with human, which requires an excellent level of transparency (i.e. the ability of ...

Generating safety trajectories by taking into account the piece manipulated by the collaborative robot

IRSST

Human-robot cooperation continues to grow in the industry, bringing security challenges. Inspired by this new demand, several manufacturers have designed new "collaborative" robots, such as Universal Robot E-SERIES robots, OMRON TM or FANUC CR-15iA. This new generation of robots aims to eliminate physical barriers, while ensuring the safety of the ...

Détection automatique de tâches d'insertion pour la programmation par démonstration

Robotiq

De nos jours, les robots collaboratifs se font souvent enseigner des tâches à l'aide de démonstrations physiques plutôt que d'avoir à les programmer textuellement. Cette technique fonctionne bien pour plusieurs cas; par contre, certaines tâches comme des insertions précises peuvent être difficilement enseignées avec une programmation qui est ...

Design of a displacement sensor to manually control a six-degree-of-freedom serial robot

MEGATRACTION

The main goal of this research project is to develop a displacement sensor. This sensor will be a miniature passive parallel robot and will be mounted on the wrist of a serial robot. The user will be able to move the parallel robot to control the serial one.

Design of a macro/mini collaborative robot using a low-impedance mini mechanism with haptic feedback capabilities

Olympus

Human-Robot collaboration in manufacturing environment allows leverage of both human operator capabilities such as flexibility and dexterity and of robotic systems capabilities such as speed of execution, high precision and larger payload. This project aims at developing a macro/mini Cartesian architecture which allows collaboration between human and robot for ...